Displaying Sdsl Cell Line Profiles - ADC AVIDIA SWD4573I1 User Manual

Configuring SDSL Cell Line Profiles
Parameters
<rate>
The desired transmit rate, in kbps. The valid range supported by the SDSL cell card is from
64 to 2,048, in increments of 64. However, the specified rate must be supported by the
remote modem. See the remote modem documentation to verify the supported data rates.
Example
::line=> new 768

Displaying SDSL Cell Line Profiles

From the ::line=> prompt, type the show command in the following format, then press
ENTER .
show [<index>]
Parameter
[<index>]
The SDSL cell line profile table index number of the profile you want to display. Omitting
this parameter displays the entire SDSL cell line profile table.
Examples
::line=> show 1
::line=> show
The following screen illustrates an example of both show line commands.
::line=> show 1
Index Rate_Mode
1 Fixed
::line=> show
Index Rate_Mode
1 Fixed
2 Fixed
120
Rate
1536
Rate
1536
768
Avidia System Configuration and Management User Manual