Deleting Primary And Backup Cell Channel Card Pvpcs - ADC AVIDIA SWD4573I1 User Manual

Configuring PVPCs

Deleting Primary and Backup Cell Channel Card PVPCs

If you remove a card from the system, the PVPCs associated with the ports on
that card are disabled, however the PVPC configuration is not automatically
removed from the PVPC table. Be sure to delete unused PVPC configurations
so the PVPC configuration table accurately reflects the PVPCs in use in the
system.
1 From the ::pvpc=> prompt, type show then press
PVPCs.
2 Note the index number, port number, and VPI for the PVPC you want to delete.
3 Type the delete command in the following format then press
delete <index> [-backup]
Parameters
<index>
The index number of the PVPC you want to delete.
[-backup]
(Optional) Type -backup to delete the backup PVPC associated with the primary PVPC
and leave the primary PVPC configuration in place. Omitting this parameter deletes both
the primary PVPC and any configured backup PVPC.
Examples
::pvpc=> delete 2 -backup
::pvpc=> delete 2
168
ENTER
to display all configured
ENTER
Avidia System Configuration and Management User Manual
.