Table of Contents
Advertisement
Configuring System Trap Generation Status
C
ONFIGURING
Traps are messages sent from the management card regarding system events, such as alarms.
The Avidia system distinguishes between two types of traps. Agent authentication traps are
generated when the system receives an invalid SNMP community string. (See
Community Strings" on page 97
generated in response to system events such as alarms and configuration changes. You must
specify whether or not you want the system to generate each type of trap.
1
In the
System Settings
all trap generation other than the agent authentication trap.
2
In the
Agent Authentication Trap
authentication error trap generation.
3
Do one of the following:
•
To activate the new settings, click
•
To cancel the new settings, click
not yet clicked
C
ONFIGURING
You must specify the location from which to boot the management card image file. For an
explanation of Avidia image files, see
1
In the
System Settings
•
Click
nvram
•
Click
network
382
S
T
YSTEM
RAP
for more information on community strings.) General traps are
window
Agent Trap
box, select
Get
Set
.
B
F
OOT
ILE
"Avidia System File Management" on page
window
Boot Mode
to set the boot location to management card NVRAM.
to set the boot location to an external TFTP server using TFTP protocol.
G
ENERATION
box, select
or
enable
enable
or
disable
to enable or disable agent
Set
.
. You can only cancel the new settings if you have
I
NFORMATION
box, do one of the following:
Avidia System Configuration and Management User Manual
S
TATUS
"Configuring
to enable or disable
disable
8.
Advertisement
Table of Contents
