Table of Contents
Advertisement
Configuring IP Routing
Click
and
the table.
displays the next page of the table. Click
The
IP Routing Table
Information
Destination IP
Subnet Mask
Next Hop
Port
Hop Count
Type
Protocol
Age (sec)
Adding IP Routing Table Entries
1
In the
Destination IP
2
In the
Next Hop
is to be forwarded.
3
In the
Hop Count
destination.
4
Click
Add
to activate the settings.
496
if necessary to view the entire
window displays the following information:
Description
The IP address of the routing entry.
The subnet mask used to specify what portion of the IP address is
considered when determining whether to route the packet based on
the data in this table row.
The IP address of the next router in the network to which the packet is
to be forwarded.
An index number assigned by the system to the interface over which
the packet is routed. The management card Ethernet port always has
an index of 1. The number 2 indicates a loopback. The system assigns
numbers to other interfaces, such as line and channel card interfaces.
The number of hops the packet is allowed to make to get to its
destination. This value is used by the RIP. If the packet makes the
maximum allowable hopes and is not yet at its destination, it is deleted.
The type of routing connection. Options:
• Indirect (requires multiple hops)
• Direct (local connection)
• Invalid (the route is invalid)
• Other (none of the above options)
The method by which the data in the IP Routing Table entry was
learned, either Local (manually configured) or RIP (learned
dynamically).
The number of seconds the IP Routing Table entry has been in the
table. Learned routing entries are automatically deleted once their Age
exceeds the maximum, which is determined by the routing protocol.
Static routes must be deleted manually.
box, type the IP address of the routing entry.
box, type the IP address of the next router in the network to which the packet
box, type the number of hops the packet is allowed to make to get to its
IP Routing Table
.
Get
to update the
Avidia System Configuration and Management User Manual
displays the beginning of
IP Routing Table
data.
Advertisement
Table of Contents
