Table of Contents
Advertisement
Deleting SDSL Cell Line Profiles
You cannot delete profiles that are assigned to ports. You cannot delete the
default profile.
1
In the
SDSL Cell Line Profile Table
line configuration profile you want to delete.
Click
and
table.
displays the next page of the table.
2
Select the
Delete
select the
Delete
deleted), click
If you decide not to delete a selected row, clear the
to clear the
Clear All
3
Click
Delete Checked Row(s)
A confirmation dialog displays.
4
Do one of the following:
•
Click
OK
•
Click
Cancel
C
ONFIGURING
SDSL cell alarm profiles determine the conditions that generate SNMP traps. When the
configured thresholds are met or exceeded, the SNMP agent sends a trap to the configured trap
receiver(s). Only one trap is sent for each 15-minute data collection period. You assign alarm
profiles to SDSL ports during port configuration. A default profile exists with an index of 1.
You cannot delete the default profile. Setting the threshold value to zero disables the trap.
To configure an SDSL cell alarm profile:
1
Open the
SDSL Cell Port Configuration
page
404).
2
Click the
Alarm Profile Browse
Avidia System Configuration and Management User Manual
window, locate the table row that contains the SDSL cell
if necessary to view the entire table.
check box next to the row that contains the profile you want to delete. To
check box for all rows (except the default profile, which cannot be
Check All
.
check box for all rows.
Delete
to delete the profiles.
to delete the selected table rows.
to not delete the table rows.
SDSL C
ELL
button.
Chapter 20: Configuring Subscriber Services
Delete
check box next to the row. Click
A
P
LARM
window (see
"Configuring SDSL Cell Service" on
displays the beginning of the
ROFILES
401
Advertisement
Table of Contents
