Table of Contents
Advertisement
Displaying System Inventory
Changing a User Password
The password command changes the login password for the current user. No user can change
the password for another user.
1
From the ::user=> prompt, type the show command then press
password
2
At the prompt, type the current password then press
3
At the prompt, type the new password then press
The password must be between 4 and 16 alphanumeric characters and the first character
must be a letter. The password cannot contain spaces, but can contain multiple words
separated by and underscore.
4
At the prompt, retype the new password then press
D
ISPLAYING
You can display the card description, serial number, hardware version, firmware version and
software version for each card installed in the system.
1
From the ::root=> prompt, type the following command then press
the :: hardware=> prompt.
display hardware
2
Type the cards command in the following format then press
cards [<slot number>]
Parameter
[<slot number>]
Specifies a particular slot for which to display an inventory. Omitting this parameter
displays information about all cards installed in the system.
Examples
:: hardware=> cards 4
:: hardware=> cards
364
S
I
YSTEM
NVENTORY
ENTER
.
ENTER
.
ENTER
.
ENTER
Avidia System Configuration and Management User Manual
ENTER
.
ENTER
to display
.
Advertisement
Table of Contents
