Configuring The Gateway Ip Address; Displaying The System Ip Addresses - ADC AVIDIA SWD4573I1 User Manual

Configuring the Gateway IP Address

If a gateway exists on the network to which the Avidia system is attached and you did not
configure the gateway with the IP address, from the ::ip=> prompt type the defaultroute
command in the following format then press
192.168.0.100.
defaultroute <gwaddr>
Parameter
<gwaddr>
The IP address of a router on the Ethernet network through which the Avidia system can
communicate with external networks (format xxx.xxx.xxx.xxx).
Example
::ip=> defaultroute 192.168.0.100

Displaying the System IP Addresses

From the ::ip=> prompt, type show then press
displays.
::ip=> show
AMC Card Ethernet Port IP Address:
AMC Card Ethernet Port IP Subnet Mask:
AMC Card Default Gateway:
Avidia System Configuration and Management User Manual
Chapter 5: Configuring System Parameters
ENTER
. The default gateway IP address is
ENTER . A screen similar to the following
192.168.0.1
255.255.255.0
192.168.0.100
93