ADC AVIDIA SWD4573I1 User Manual page 201

System configuration and management
Table of Contents

Advertisement

Deleting Primary and Backup Cell Channel Card PVCCs
You can delete primary and backup cell channel card PVCCs from the ::pvcc=> prompt.
If you remove a card from the system, the PVCCs associated with the ports on
that card are disabled, however the PVCC configuration is not automatically
removed from the PVCC table. Be sure to delete unused PVCC configurations
so the PVCC configuration table accurately reflects the PVCCs in use in the
system.
1
From the ::pvcc=> prompt, type show then press
parameters for all PVCCs.
2
Note the index number of the PVCC you want to delete (or for which you want to delete
the backup PVCC).
3
Type the delete command in the following format then press
delete <index> [-backup]
Parameters
<index>
The index number of the PVCC you want to delete.
[-backup]
(Optional) Type -backup to delete the backup PVCC associated with the primary PVCC
and leave the primary PVCC configuration in place. Omitting this parameter deletes both
the primary PVCC and any configured backup PVCC.
Examples
::pvcc=> delete 2 -backup
::pvcc=> delete 2
Avidia System Configuration and Management User Manual
Chapter 8: Configuring ATM Virtual Circuits
ENTER
to display the configured
ENTER
.
175

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avidia switchware version 2.0

Table of Contents

Save Article as PDF