Table of Contents
Advertisement
Configuring APS
Deleting ATM Traffic Profiles
You cannot delete profiles that are assigned to ports.
1
In the
ATM Traffic Descriptor Configuration Table
the ATM traffic descriptor profile you want to delete.
Click
and
table.
displays the next page of the table.
2
Select the
Delete
select the
Delete
deleted), click
If you decide not to delete a selected row, clear the
to clear the
Clear All
3
Click
Delete Checked Row(s)
A confirmation dialog displays.
4
Click
OK
to delete the selected table rows, otherwise click
C
ONFIGURING
Avidia systems use Automatic Protection Switching (APS) to switch ATM traffic from the main
SONET channel (the working channel) to a secondary SONET channel (the protection channel)
when a failure occurs. This redundancy enables service to continue despite failures on the
working SONET channel.
You configure APS from the
1
Do one of the following to open the
•
In the
Site Map Navigation
•
In the
Tree Navigation
430
if necessary to view the entire table.
check box next to the row that contains the profile you want to delete. To
check box for all rows (except the default profile, which cannot be
Check All
.
check box for all rows.
Delete
to delete the profiles.
APS
APS Configuration
window, click
window, click
window, locate the table row that contains
Delete
check box next to the row. Click
window.
APS Configuration - Slot Selection
APS Configuration
Administration, APS Configuration
Avidia System Configuration and Management User Manual
displays the beginning of the
Cancel
.
window:
.
.
Advertisement
Table of Contents
