ADC AVIDIA SWD4573I1 User Manual page 270

Modifying RIP Configuration
Examples
::rip=> show
::rip=> show 10.0.0.120
A screen similar to the following displays.
::rip=> show
Index IPAddr
1 10.0.11.37
Information
Index
IPAddr
Send
Receive
Hop Count
Authentication
244
Send Receive
ripv1c v1orv2
Description
The RIP Configuration Table row index number.
The IP address of the routing session.
The type of RIP packets to be sent. The RIP type is determined by the
RIP version used by the other routers in the network. The options are:
• donotsend (no RIP packets are sent)
• ripv1
• ripv1c (RIP2-type packets that are compatible with
RIP 1)
• ripv2
The type of RIP packets to be received. The options are:
• ripv1
• ripv2
• v1orv2
• donotreceive (no RIP packets are received)
The number of hops the packets are allowed to cross before arriving at
their destination.
Indicates whether a password is required to enable the router to learn
information from the session ports in the same network segment. The
options are No Authentication or Simple Password (text string).
Hop Count Authentication
5 No
Avidia System Configuration and Management User Manual