Deleting Sessions; Configuring Ip Routing - ADC AVIDIA SWD4573I1 User Manual

Deleting Sessions

1 From the ::session=> prompt, type show then press
sessions.
2 Note the index number of the Session Configuration Table row you want to delete.
3 Type the delete command in the following format then press
delete <index>
Parameter
<index>
The Session Configuration Table row index number of the session you want to delete.
Example
::session=> delete 2
C
ONFIGURING
The IP Routing Table contains the information that is used by the management card to route
data. Packets for which the network portion of the destination IP address match the IP address
listed in the first column of the table are routed based on the data displayed in the corresponding
table row.
You configure IP routing from the ::routingtb=> prompt. From the ::root=> prompt,
type the following command then press
configuration routing routingtb
Avidia System Configuration and Management User Manual
IP R
OUTING
ENTER
Chapter 10: Configuring Bridging and Routing
ENTER
to display the configured
ENTER
to display the ::routingtb=> prompt.
.
235