Adding OAM Loopbacks
1
In the
OAM Loopback Table
The
Add OAM Loopback Entry
2
In the
Slot
and
3
In the
OAM Flow Type
OAM F4 flow loopbacks test circuits at a VPC level (requires a VPI only), where OAM F5
flow loopbacks test circuits at a VCC level (requires a VPI and a VCI).
4
In the
VPI
and
•
For an OAM Flow Type F4 loopback, type the VPI for the VPC.
•
For an OAM Flow Type F5 loopback, type the VPI and VCI for the VCC.
Avidia System Configuration and Management User Manual
window, click
window displays.
Port
boxes, select the slot and port where the loopback will be initiated.
box, select either
VCI
boxes, do one of the following:
Chapter 29: System Maintenance and Administration
.
F4
or
F5
.
561