Configuring SDSL Cell Service
Deleting SDSL Cell Alarm Profiles
You cannot delete profiles that are assigned to ports.
1
From the ::alarm=> prompt, type show then press
SDSL cell alarm profiles.
2
Note the index number of the profile you want to delete.
3
Type the delete command in the following format then press
delete <index>
Parameter
<index>
The index number of the alarm profile you want to delete.
Example
::alarm=> delete 3
C
ONFIGURING
Before configuring an SDSL cell port, make sure you have:
Set up the desired SDSL cell line profile (see
page 119
for instructions).
Set up the desired SDSL cell alarm profile
on page 121
You configure SDSL cell channels from the ::cell=> prompt. From the ::root=> prompt,
type the following command, then press
configuration sdsl cell
124
SDSL C
for instructions).
ENTER
S
ELL
ERVICE
"Configuring SDSL Cell Line Profiles" on
(see"Configuring SDSL Cell Alarm Profiles"
ENTER
to display the ::cell=> prompt.
Avidia System Configuration and Management User Manual
to display the configured
ENTER
.