Table of Contents
Advertisement
Example
::clock=> show 5
The following screen illustrates an example of the show clock command.
::clock=> show 5
IDSL clock source for slot 5: local
Modifying IDSL Port Configurations
Each IDSL port is automatically assigned a default configuration. This procedure describes how
to modify the configuration to reflect the desired service.
1
You configure IDSL ports from the ::idsl=> prompt. From the ::root=> prompt,
type the following command then press
configuration idsl
2
From the ::idsl=> prompt, type the following command then press
the ::line=> prompt.
profile line
3
Type show then press
4
Note the index number of the line profile you want to assign to the channel.
5
Type the following command then press
configuration idsl profile alarm
6
Type show then press
7
Note the index number of the alarm profile you want to assign to the channel.
8
Type the following command then press
configuration idsl
9
Type the set command in the following format then press
set <port> <lpindex> <apindex> (up|down) [<circuit id>]
Avidia System Configuration and Management User Manual
ENTER
ENTER
to display the configured line profiles.
ENTER
ENTER
to display the configured alarm profiles.
ENTER
Chapter 6: Configuring Subscriber Services
to display the ::idsl=> prompt.
to display the ::alarm=> prompt.
to display the ::idsl=> prompt.
ENTER
.
ENTER
to display
135
Advertisement
Table of Contents
