Configuring Sdsl Cell Line Profiles; Adding Sdsl Cell Line Profiles - ADC AVIDIA SWD4573I1 User Manual

The following screen illustrates an example of both show sdsl commands.
::frame=> show
Port
4.1
4.2
::frame=> show 4.1
Port
4.1
C
ONFIGURING
SDSL cell line profiles contain a preconfigured set of parameters, including the rate adaptation
mode and the transmit rate. SDSL cell port configuration requires you to apply an SDSL cell
line profile to the line, therefore you must configure the desired SDSL cell line profile before
configuring the SDSL cell port. A default profile exists with an index of 1. You cannot delete
the default profile.
You configure SDSL cell line profiles from the ::line=> prompt. From the ::root=>
prompt, type the following command, then press
configuration sdsl cell profile line

Adding SDSL Cell Line Profiles

Currently, Fixed Rate is the only supported rate adaptation mode, therefore all SDSL cell line
profiles are automatically configured for Fixed Rate.
From the ::line=> prompt, type the new command in the following format then press
ENTER
to create a new SDSL cell line profile.
new <rate>
Avidia System Configuration and Management User Manual
Line Alarm
Profile Profile
1 1
2 4
Line Alarm
Profile Profile
1 1
SDSL C
Chapter 6: Configuring Subscriber Services
Admin
Status
up
down
Admin
Status
up
L P
ELL INE ROFILES
ENTER
to display the ::line=> prompt.
119