Table of Contents
Advertisement
Configuring the System Date and Time
It is important to set the system date and time so the alarms and events logs reflect the actual
time each event occurred. From the ::system=> prompt, type the time command in the
following format then press
time <hh>:<mm>:[<ss>] [<mm>/<dd>/<yyyy>]
The Avidia system automatically supports leap year dates.
Parameters
<hh>
The current hour represented in two-digit 24-hour format (for example, 2 a.m. is
represented by the numbers 02, and 2 p.m. is represented by the number 14).
<mm>
The current minute represented in two-digit format (for example, 03).
[<ss>]
The current second represented in two-digit format (for example, 03).
[<mm>]
The current month represented in numerical format (for example, August is represented by
8 or 08).
[<dd>]
The current day of the month (for example, 5 or 05).
[<yyyy>]
The current year, in four-digit format (1999).
Example
::system=> time 02:03:03 07/05/1999
Avidia System Configuration and Management User Manual
ENTER
.
Chapter 5: Configuring System Parameters
89
Advertisement
Table of Contents
