Modifying System Bridging Parameters
In the
System Bridging Configuration
1
Use the
WAN Broadcast
to all WAN logical interfaces.
2
Use the
Bridging
3
In the
Aging Time Interval
entries are deleted if they are not relearned. The valid rate is 10 - 1000000. The default is
300 seconds.
4
Use the
Spanning Tree Protocol
5
Do one of the following:
•
To activate the settings and close the
•
To cancel the settings and close the
Avidia System Configuration and Management User Manual
window:
box to
Enable
or
box to
Enable
or
Disable
box, type the interval, in seconds, after which Bridging Table
box to
Enable
Chapter 24: Configuring Bridging and Routing
Disable
the broadcasting of unknown WAN frames
bridging for the system.
or
Disable
STP for the system.
System Bridging Configuration
System Bridging Configuration
window, click
Set
.
window, click
Close
.
501