Step 2: Set the Management Card IP Addresses
Examples
::ip=> addr 192.168.0.1 255.255.255.0
::ip=> addr 192.168.0.1
::ip=> addr 192.168.0.1 255.255.255.0 192.168.0.100
Setting the Gateway IP Address
If a gateway exists on the network to which the Avidia system is attached and you did not
configure the gateway with the IP address, type the defaultroute command in the following
format then press
defaultroute <gwaddr>
Parameter
<gwaddr>
The IP address of a router on the Ethernet network through which the Avidia system can
communicate with external networks (format xxx.xxx.xxx.xxx). The default gateway IP
address is 192.168.0.100.
Example
::ip=> defaultroute 192.168.0.100
Displaying the System IP Addresses
To verify your configuration, from the ::ip=> prompt, type show then press
screen similar to the following displays.
::ip=> show
AMC Card Ethernet Port IP Address:
AMC Card Ethernet Port IP Subnet Mask:
AMC Card Default Gateway:
14
ENTER
.
192.168.0.1
255.255.255.0
192.168.0.100
Avidia System Configuration and Management User Manual
ENTER
. A