Table of Contents
Advertisement
C
ONFIGURING
Before configuring an SDSL port, make sure you have:
Set up the desired SDSL line profile (see
page 111
for instructions).
Set up the desired SDSL alarm profile (see
page 114
for instructions).
You configure SDSL frame channels from the ::frame=> prompt. From the ::root=>
prompt, type the following command then press
configuration sdsl frame
Adding SDSL Frame Port Configurations
Each SDSL frame port is automatically assigned a default configuration. The default profile
index number for each SDSL frame profile type is 1. This procedure describes how to modify
the configuration to reflect the desired service.
1
From the ::frame=> prompt, type the following command then press
the ::line=> prompt.
profile line
2
Type show then press
3
Note the index number of the line profile you want to assign to the channel.
4
Type the following command then press
configuration sdsl frame profile alarm
5
Type show then press
6
Note the index number of the alarm profile you want to assign to the channel.
7
Type the following command then press
configuration sdsl frame
8
Type the set command in the following format then press
set <port> <lpindex> <apindex> (up|down)
Avidia System Configuration and Management User Manual
SDSL F
RAME
ENTER
to display the configured line profiles.
ENTER
to display the configured alarm profiles.
Chapter 6: Configuring Subscriber Services
S
ERVICE
"Configuring SDSL Frame Line Profiles" on
"Configuring SDSL Frame Alarm Profiles" on
ENTER
to display the ::frame=> prompt.
ENTER
to display the ::alarm=> prompt.
ENTER
to display the ::frame=> prompt.
ENTER
ENTER
to display
.
117
Advertisement
Table of Contents
