Table of Contents
Advertisement
3
In the
SNR
box, type a value for this threshold, or type 0 to disable the trap.
The signal-to-noise ratio threshold determines how much margin can be dropped before the
number of bit errors exceeds the ratio of 1x10
4
Click
Add
to add the SDSL cell alarm profile.
Deleting SDSL Cell Alarm Profiles
You cannot delete profiles that are assigned to ports.
1
In the
SDSL Cell Alarm Profile Table
alarm configuration profile you want to delete.
Click
and
table.
displays the next page of the table.
2
Select the
Delete
select the
Delete
deleted), click
If you decide not to delete a selected row, clear the
Clear All
to clear the
3
Click
Delete Checked Row(s)
A confirmation dialog displays.
4
Do one of the following:
•
Click
OK
•
Click
Cancel
Avidia System Configuration and Management User Manual
window, locate the table row that contains the SDSL cell
if necessary to view the entire table.
check box next to the row that contains the profile you want to delete. To
check box for all rows (except the default profile, which cannot be
Check All
.
Delete
check box for all rows.
to delete the profiles.
to delete the selected table rows.
to not delete the table rows.
Chapter 20: Configuring Subscriber Services
-7
errored bits per bits transmitted.
displays the beginning of the
Delete
check box next to the row. Click
403
Advertisement
Table of Contents
