Table of Contents
Advertisement
Modifying a Frame Relay Configuration
3
To modify the administrative status, in the
activate the frame channel card and line card connection or
4
In the
Data Link
a
To modify the poll interval value, in the
valid range is 5 to 30, with 10 as the default.
b
To modify the inquiry interval value, in the
range is 1 to 255, with 6 as the default.
c
To modify the error threshold, in the
is 1 to 10, with 3 as the default.
d
To modify the monitor events value, in the
range is 1 to 10, with 4 as the default.
5
If
Interworking FRF.5
a
To modify the Rx LP mode, in the
b
To modify the Tx LP mode, in the
c
To modify the CLP mask, in the
is set to
476
row, unless
LMI Type
displays, you can do the following:
2
(
0
or
1
).
Admin Status
box select the desired setting (
is set to
you can do the following:
None
Poll Interval
box type the value in seconds. The
Inquiry Interval
Error Threshold
box type the value. The valid range
Monitor Events
Rx LP Mode
box select the desired setting (
Tx LP Mode
box select the desired setting (
CLP Mask
box select the mask used when
Avidia System Configuration and Management User Manual
Down
to deactivate it).
box type the value. The valid
box type the value. The valid
1
Tx LP Mode
Up
to
1
or
2
).
or
2
).
Advertisement
Table of Contents
