Table of Contents
Advertisement
Chapter 3 Configuring Ports and Channels Using the Console Interface
Setting the Values for Ports and Channels
Configuring a Virtual Port with Up to 24 Channels
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
3-16
5 To configure the remainder of the virtual ports and their associated
channels, repeat Step 5 on page 3-7 through Step 8 on page 3-12, and
Step 1 on page 3-12 through Step 4 on page 3-15.
Note:
Be sure to completely configure each virtual port and channel and
its selected interface before beginning the configuration of
another virtual port.
6 Save the values permanently to the PSAX system database now, or
before you exit the current session of the PSAX system console interface.
See "Saving the Equipment Configuration and Logging Off" on
page 3-24.
End
To view statistics for virtual ports, see "Viewing Port Statistics" on page 3-19
You can configure a virtual port with up to 24 channels. You have several
options for configuring the 24 channels as follows:
•
Strap two or more DS0 channels together as one group.
•
Set up two or more strapped groups.
•
Configure all 24 channels separately.
Continue from Step 8 on page 3-12 and use the following procedure:
Release 7.0
255-700-184
Advertisement
Table of Contents
