Table of Contents
Advertisement
Viewing the Statistics
Window
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 7 Provisioning Connections Using the Console Interface
Adding a Circuit Emulation-to-Circuit Emulation PVC Connection
Table 7-16. Field Values for the Frame Relay-to-Frame Relay PVC Traffic
Parameters Window
Field Name
[Sustained Cell
Default: 1
Rate]
(display only)
[Max Burst
Default: 1
Size]
(display only)
3 To add (apply) the connection configuration, select the Add This
Connection command and press Enter.
4 To review this connection, select the Go Back to Connection Table
command and press Enter (or press Ctrl + b).
The Frame Relay-to-Frame Relay PVC Table window returns, displaying
the values you just applied.
5 To add more connections of this type, repeat steps 2 through 5 for more
connections as needed.
End
From the Frame Relay-to-Frame Relay PVC window, select the View
Statistics command.
The Frame Relay-to-Frame Relay PVC Statistics window is displayed
(see Figure 7-25).
Values
Sustained cell rate. Refer to the ATM
UNI 3.0 specifications for more infor-
mation. When setting this value, take
into account the line rate for the mod-
ule and the amount of bandwidth you
are setting up for each interface for the
module.
Maximum burst size. Refer to the ATM
UNI 3.0 specifications for more infor-
mation. When setting this value, take
into account the line rate for the mod-
ule and the amount of bandwidth you
are setting up for each interface for the
module.
Description
Release 7.0
7-63
Advertisement
Table of Contents
