Table of Contents
Advertisement
Creating a Frame
Relay-to-Frame PVC
Relay Connection
Commands
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 7 Provisioning Connections Using the Console Interface
Adding a Circuit Emulation-to-Circuit Emulation PVC Connection
Perform the steps in the following procedure to add a frame relay-to-frame
relay PVC connection, starting at the Connection Configuration Menu
window.
Steps to Create a Frame Relay-to-Frame Relay PVC Connection
Begin
1 On the Connection Configuration Menu window, select Frame Relay-
to-Frame Relay and press Enter.
The Frame Relay-to-Frame Relay PVC Table window (see Figure 7-22) is
displayed.
Figure 7-22. Frame Relay-to-Frame Relay PVC Table Window
Note:
At the time of initial installation, the Frame Relay-to-Frame Relay
PVC Table window is empty. After you have set up connections,
this window displays all the connections of this type in the
system.
The commands on this window have the following functions.
Release 7.0
7-57
Advertisement
Table of Contents
