Table of Contents
Advertisement
Creating a Frame
Relay-to-ATM VCC
PVC Connection
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 7 Provisioning Connections Using the Console Interface
Adding a Circuit Emulation-to-Circuit Emulation PVC Connection
Perform the steps in the following procedure to create a frame relay-to-ATM
VCC PVC connection, starting at the Connection Configuration Menu
window.
Steps to Create a Frame Relay-to-ATM VCC PVC Connection
Begin
Note:
The Operations Administration and Maintenance (OAM) feature
is enabled on this screen. Statistical OAM information is provided
on the related statistics screen, while additional OAM
functionality can be enabled from the Diagnostics Menu.
1 On the Connection Configuration Menu window, select Frame Relay-
to-ATM VCC and press Enter.
The Frame Relay-to-ATM VCC PVC Table window (see Figure 7-18) is
displayed.
Figure 7-18. Frame Relay-to-ATM VCC PVC Table Window
Note:
At the time of initial installation, the Frame Relay-to-ATM VCC
PVC Table window is empty. After you have set up connections,
this window displays all the connections of this type in the
system.
Release 7.0
7-47
Advertisement
Table of Contents
