Editing Atm-To-Atm Vcc Svc Connection Entries; Viewing Or Editing An Atm-To-Atm Svc Connection - Lucent Technologies PacketStar PSAX Series User Manual

1-port channelized sts-1e, t1 format module

Hide thumbs Also See for PacketStar PSAX Series:

Table of Contents

Editing ATM-to-ATM VCC SVC Connection Entries

Viewing or Editing an

ATM-to-ATM SVC

1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1

Chapter 7 Provisioning Connections Using the Console Interface

Adding a Circuit Emulation-to-Circuit Emulation PVC Connection

Figure 7-32. ATM-to-ATM VCC SVC Table Window

The commands on this window have the following functions:

• Go Back to Connection

To refresh the display of SVCs, select the Go Back to Connection Menu

command, and then select the ATM-to-ATM VCC option again.

The SVC connections that display on the ATM-to-ATM VCC SVC Table

window change dynamically as they are created and then torn down.

Perform the steps in the following procedure to view or edit an ATM-to-ATM

SVC connection, starting at the Connection Configuration Menu window.

To find a particular connection, enter val-

ues in the Slot, Port, Chnl, VPI, and VCI

fields If the connection exists, it is dis-

played on the first line of the table.

Redisplays the Connection Configuration

Menu window.