Table of Contents
Advertisement
Table 8-26. Field Values for the Display Connection: ATM-to-ATM_SVC Window
Field Names
OAM Status
Default: Unsupp
End-Pt
Seg-Pt
End-Seg-Pt
Intermediate-Pt
Connection
Inactive,
Status
Active
(display only)
Statistics Page
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 8 Provisioning Connections Using the AQueView
Values
OAM is not in use.
The Multiservice Media Gateway is used as a termination
point for ATM.
Note:
The OAM loopback test is supported for end-to-end
connections only.
Not supported.
Not supported.
The Multiservice Media Gateway is used as a network node
and an intermediate ATM device that does not terminate the
ATM connection.
Use this value to enable trunk conditioning. For more infor-
mation, see the Trunk Conditioning Application Note for Packet-
®
Star
PSAX Multiservice Media Gateways.
Note:
The OAM loopback test is supported for end-to-end
connections only.
This field displays the current status of the connection. The
value indicates whether the connection is passing traffic.
4 Click the Statistics tab.
The Statistics page appears (Figure 8-76). The Statistics page displays
the statistics for this connection.
Adding Switched Virtual Connections
Description
®
System
Release 7.0
8-147
Advertisement
Table of Contents
