Safety Information - Lucent Technologies PacketStar PSAX Series User Manual

1-port channelized sts-1e, t1 format module

Hide thumbs Also See for PacketStar PSAX Series:

Table of Contents

1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1

When installing and operating the PacketStar

Gateway, follow the safety guidelines provided below to help prevent serious

personal injury and damage to the PSAX equipment. Please read all warnings

and instructions supplied before beginning installation or configuration of

the PSAX equipment. In addition to the general safety information provided

below, you should also refer to the text in the user and installation guides for

other important safety information and procedures.

Read all installation instructions before connecting the system to a

power source.

Be sure to use the ejector handles during installation and removal of I/O

and server modules.

Electrostatic discharge (ESD) can damage module and chassis

components. All personnel should be grounded and follow proper ESD

procedures before installing, removing, or handling hardware

Ultimate disposal of this product should be handled according to all laws

and regulations in your specific geographic region.

Do not make electrical or mechanical modifications to any of the

components in the PSAX system. Lucent Technologies is not responsible

for the safety or the performance of a modified Lucent product. Do not

attempt to repair any failed Power Supply module, Stratum 3–4 module,

CPU module, I/O, or server module.

Safety Information

PSAX Multiservice Media