Table of Contents
Advertisement
Chapter 5 Configuring the Interfaces Using the Console Interface
Configuring the ATM PNNI 1.0 Interface
Changing PNNI Values
Changing the Non-administrative Weight Values for the ATM PNNI Interface
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
5-20
Table 5-5. Field Values for the ATM PNNI Interface Statistics Window
Field Name
[Valid Cells Rcvd]
Number of valid cells received into interface side A
during the amount of time shown in Time Elapsed
field.
[Errored Cells
Number of errored cells received into interface side A
Rcvd]
during the amount of time shown in Time Elapsed
field.
[Mismatched Cells
Number of mismatched cells received into interface
side A during the amount of time shown in Time
Rcvd]
Elapsed field.
[Valid Cells Sent]
Number of valid cells transmitted out of inter-face side
B during the amount of time shown in Time Elapsed
field.
[Null Cells Sent]
Number of null cells transmitted out of inter-face side
B during the amount of time shown in Time Elapsed
field.
[Time Elapsed]
Time elapsed since last reset in h:mm:ss (hour:min-
utes:seconds) format..
End
If you need to change the interface configuration values for AdminWeight-
cbr, AdminWeight-rtVbr, AdminWeight-nrtVbr, or AdminWeight-ubr at
any time after the interface has been brought into service, you must first take
the interface out of service, reconfigure the desired values, apply those
values, and bring the interface back into service (see "Taking the Interface
Out of Service" in this chapter).
If you need to change the interface configuration values other than
AdminWeight-cbr, AdminWeight-rtVbr, AdminWeight-nrtVbr, or
AdminWeight-ubr at any time after the interface has been brought into
service, you must first take the interface out of service, delete the interface,
and then re-create the interface by configuring the desired values.
Description
255-700-184
Release 7.0
Advertisement
Table of Contents
