Table of Contents
Advertisement
Buttons
Copying an Interface Configuration
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 6 Configuring the Interfaces Using the AQueView
Figure 6-19. Frame Relay LMI DLCI Status Table Window (Displaying Menu)
The buttons on this window have the following functions:
Button
• Find
• Reset
• Close
In the Frame Relay LMI DLCI Status Table window, you can view the DLCI,
operational status, and status change time stamp of each frame relay
interface in the PSAX device.
To update the information in the Frame Relay LMI DLCI Status Table
window, click the right mouse button and a menu is displayed.
Click Refresh.
End
The Copy button on each Interface Configuration window enables you to
copy an interface configuration to a range of channels. To copy an interface
configuration to a range of channels, perform the steps in the following
procedure from the appropriate Interface Configuration window.
Copying an Interface Configuration to Multiple Channels
Begin
1 In the Interface Configuration window, click Copy.
Configuring the Circuit Emulation Interface Interface
Function
Searches the table and displays a matching
text string entered in the Show table
entry containing: field.
Removes text entered in the Show table
entry containing: field and de-selects any
selected entries.
Closes this window.
®
System
Release 7.0
6-47
Advertisement
Table of Contents
