Table of Contents
Advertisement
7
Provisioning Connections Using the
Overview of This Chapter
®
PacketStar
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
255-700-184
This chapter describes how to set up permanent virtual circuit (PVC),
switched virtual circuit (SVC), and soft permanent virtual circuit (SPVC)
connections in the PSAX systems for service provisioning and how to view
statistics data for billing and performance monitoring. Before you provision
connections for the modules, you must have first completed the following
tasks:
•
Setting the configuration values for one or more ports on the
Channelized DS3 module
•
Setting the configuration values for the various types of interfaces on the
Channelized DS3 module
This chapter contains instructions for configuring the following types of
connections, with the exception of the PVC and the SVC supporting the
GR-303 interface.
Note:
For instructions on configuring a GR-303 interface group on the
1-Port Channelized STS-1e, T1 Format module, see the
application note entitled Configuring the CellPipe™ IAD, Stinger
DSLAM, and PSAX Multiservice Media Gateway as Interworking
Functions Using the GR-303 Standard, Issue 1, Release 6.5.0, Comcode
300323482.
•
PVC connections:
~ ATM-to-ATM virtual channel connection (VCC)
~ ATM-to-ATM virtual path connection (VPC)
~ Circuit Emulation-to ATM virtual channel connection (VCC)
~ Circuit Emulation-to Circuit Emulation
~ Variable bit rate (VBR)-to-ATM virtual channel connection (VCC)
~ Variable bit rate (VBR)-to-VBR connection
~ Frame relay-to-ATM virtual channel connection (VCC) connection
~ Frame relay-to-frame relay connection
~ In-band management IP PVC connection
•
SVC connections:
~ ATM-ATM virtual channel connection VCC (n)
~ ATM IISP CBR connection
~ ATM IISP VBR connection
•
SPVC connections:
~ Circuit Emulation-to-ATM virtual channel connection (VCC) (y)
~ ATM-to-ATM virtual channel connection (VCC) (z)
Console Interface
Release 7.0
7-1
Advertisement
Table of Contents
