Table of Contents
Advertisement
Table 8-14. Field Descriptions for the Frame_Relay-to-ATM_VCC Connection Window
Field Names
Connection Status
(display only)
Connection Failure
Cause A
(display only)
Connection Failure
Cause B
(display only)
Primary Page
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 8 Provisioning Connections Using the AQueView
Values
Inactive, Active This field displays the current status of the connec-
tion. The value indicates whether the connection is
passing traffic.
None (default)
Frame Relay connection failure cause.
Physical, LMI,
DLCI
None (default)
Frame Relay connection failure cause.
Physical, LMI,
DLCI
If the parameters are valid, the Connections window appears with the
new connection in the Listing page, and the Display Connection
window appears with tabs that contain details about the connection (see
Figure 8-47): Primary, Statistics, and Utilization.
If a parameter is invalid, a Connection Creation Failed message appears,
stating the reason for the failure.
The Primary page displays the information used to create the connection.
See Table 8-14 for field descriptions.
Creating ATM-to-ATM VPC PVC Connections
Description
®
System
Release 7.0
8-85
Advertisement
Table of Contents
