Table of Contents
Advertisement
Chapter 7 Provisioning Connections Using the Console Interface
Configuring PVC Connections
Table 7-3. Field Values for the ATM-to-ATM Backup VCC PVC Connection Window
Field Name
[Switch Back to
Primary
Automatically]
(display only)
Creating a ATM-to-
ATM VPC Connection
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
7-16
Values
Yes (default)
No
End
Perform the steps in the following procedure to create an ATM-to-ATM VPC
connection, starting at the Connection Configuration Menu window.
Steps to Create an ATM-to-ATM VPC Connection
Begin
Note:
The Operations Administration and Maintenance (OAM) feature
is enabled on this screen. Statistical OAM information is provided
on the related statistics screen, while additional OAM
functionality can be enabled from the Diagnostics Menu.
1 On the Connection Configuration Menu window, select ATM-to-ATM
VPC and press Enter.
The ATM-to-ATM VPC PVC Table window (see Figure 7-7) is displayed.
Description
CPU monitors primary connection. If pri-
mary connection becomes available, backup
will switch back connection to primary.
Not currently supported.
Once active, the backup connection will not
switch back to primary connection automat-
ically if primary becomes available.
Release 7.0
255-700-184
Advertisement
Table of Contents
