Backup Page Buttons The buttons on the Backup page have the following functions:
Field Descriptions
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 8 Provisioning Connections Using the AQueView
Figure 8-23. Display Connection: ATM-to-ATM_VCC (Backup Page)
Button
• Create Backup PVC
• Close
6 Select the values from the fields as described in Table 8-5.
Adding Permanent Virtual Connections
Function
Establishes the backup PVC connection you
configured.
Note:
You cannot create a backup PVC
connection without selecting an ATM interface
type in the Backup ATM Interface panel.
Therefore, this button is active when the Slot,
Port, and Channel fields correspond to an ATM
interface type in the Interface field. Otherwise,
the button will be ghosted.
Closes this window.
®
System
Release 7.0
8-35