Table of Contents
Advertisement
Chapter 8 Provisioning Connections Using the AQueView
Managing Connections
Display Connection
Tabs
Copying a Connection Configuration
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
8-6
Up to four tabs may be displayed within the Display Connection window:
Primary, Statistics, Backup, and Utilization.
Clicking the Primary tab displays the Primary page, which contains the same
information as the Create Connection window for the selected connection.
Clicking the Statistics tab displays the Statistics page, which contains
statistical information for the selected connection.
Clicking the Backup tab displays the Backup page, which can be displayed
for all PVC and SPVC connection types. You can use the Backup page to
establish a backup PVC or SPVC connection. Backup connections can be
created at any time after the primary connection has been established.
Clicking the Utilization tab displays the Utilization page, which can be
displayed for all PVC and SPVC connection types. You can use the Utilization
page to calculate and display the average number of cells per second, the
average number of bits per second for a given PVC or SPVC and for a given
time interval (from 20 seconds to 5 minutes).
The Copy button on the Create Connection window and the Primary page of
each Display Connection window enables you to copy an interface
configuration to a range of channels.
Copying a Connection Configuration to Multiple Interfaces
Begin
1 To copy a connection configuration to a range of channels, begin by
opening the Create Connection window or Display Connection window
with the connection configuration you wish to copy.
2 Click Copy.
One of the following Copy Connection Configuration windows
appears; the appropriate interface types will appear in the Start At: and
Stop At: panels (see Figure 8-4 through Figure 8-7).
®
System
Release 7.0
255-700-184
Advertisement
Table of Contents
