Table of Contents
Advertisement
Clothing
Handling PSAX System Components
Technical Support
Comments on This Guide
Before You Begin
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
When working with the PSAX system, avoid wearing clothing made from
wool or synthetic materials. Try to minimize contact between clothing and
electronic components.
Follow these guidelines for proper handling of the PSAX hardware to
minimize electrostatic discharge damage:
•
Do not remove the chassis, modules, and other items from their
protective packaging until you are ready to install them.
•
When installing modules and components, use a grounding wrist strap
connected to a common electrical ground to prevent electrostatic
discharge damage. (A common electrical ground is a complete circuit
between a person or an electrical/electronic device and the earth.)
•
Store components in electrostatic-discharge-protective bags when they
are not in use.
If you experience a problem with your PSAX system, refer to the Lucent
Technologies InterNetworking Systems Global Warranty, which accompanied your
shipment, for instructions on obtaining support in your area.
To comment on the PacketStar
User Guide, please complete the comment card that accompanied your
shipment and mail it to the following address:
Manager, Information Design and Development Team
Lucent Technologies
PacketStar PSAX Products
8301 Professional Place
Landover, MD 20785
USA
You can also fax the comment card to us at: 301-809-4540.
Before you start setting up, configuring, and using your new PSAX system,
be sure you complete the following:
Chapter 1 Getting Started
®
1-Port Channelized STS-1e, T1 Format Module
Technical Support
Release 7.0
1-7
Advertisement
Table of Contents
