Adding Circuit Emulation-To-Atm Vcc Pvc Connections; Creating A Circuit Emulation-To-Atm Vcc Connection - Lucent Technologies PacketStar PSAX Series User Manual

Adding Circuit Emulation-to-ATM VCC PVC Connections

Creating a Circuit
Emulation-to-ATM
VCC Connection
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 8 Provisioning Connections Using the AQueView
The Out B or Decoded B column displays cells or bits transmitted from side A
to side B (also displayed on the Statistics page in the Cells Transmitted field
on the Interface B Statistics panel).
7 Select a time interval from the pull-down menu.
8 Average bits per second is displayed by default. If you want to display
utilization by average cells per second, click Average Cells/Sec.
9 Click Poll+ and the polling begins. Click Poll- to terminate polling.
10 To refresh this window, click Clear.
11 To close the Display Connection window, click Close.
12 To save this connection to the PSAX configuration database, click Device
> Save PSAX Configuration in the Provisioning Menu Bar.
!
CAUTION:
Click Device > Save PSAX Configuration to permanently save the
configuration.
Applied, but unsaved configuration data will not be lost unless the PSAX
system is restarted, or if power to the PSAX system is lost. Terminating the
AQueView EMS will not cause the applied values to be lost because the
configuration data is stored on the PSAX system, not in the AQueView EMS.
End
This is a CBR type of connection. A DSP2A, DSP2B, or DSP2C Voice Server
module must be present and configured in the PSAX system to enable coding
translation, voice compression, silence detection, echo cancellation, and tone
detection features. This type of connection also supports the use of a backup
ATM interface with the option of automatic switchback.
You can process voice traffic using circuit emulation-to-ATM VCC PVC
connection through the DSP2A Voice Server module by selecting one of the
pulse code modulation (PCM) types in the Coding Translation field.
Perform the steps in the following procedure to create a circuit emulation-to-
ATM VCC PVC connection.
Creating a Circuit Emulation-to-ATM VCC PVC Connection
Begin
1 Click the Connections tab.
The Listing page appears.
2 Click the right mouse button and a menu appears. Click Create New.
Creating ATM-to-ATM VPC PVC Connections
®
System
Release 7.0
8-55