Table of Contents
Advertisement
Chapter 7 Provisioning Connections Using the Console Interface
Adding a Circuit Emulation-to-Circuit Emulation PVC Connection
Viewing Connection
Statistics
Commands
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
7-102
5 To add (apply) the connection configuration, select the Add This
Connection command and press Enter.
6 To review this connection, select the Go Back to Connection Table
command and press Enter (or press Ctrl+B).
The ATM-to-ATM VCC SPVC Table window is returned, displaying the
values you just applied.
7 To add more connections of this type, repeat steps 2 through 5 for more
connections as needed.
To view statistics, select the View Connection Statistics command and press
Enter.
The ATM-to-ATM VCC SPVC Statistics window is displayed (see
Figure 7-42).
Figure 7-42. ATM-to-ATM VCC SPVC Statistics Window
The commands on this window have the following functions:
Release 7.0
255-700-184
Advertisement
Table of Contents
