Table of Contents
Advertisement
Chapter 6 Configuring the Interfaces Using the AQueView
Configuring the ATM UNI and ILMI Interfaces
Interface Utilization
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
6-26
Table 6-4. Field Values for the ATM UNI Interface Statistics Page
Field Name
Valid Cells
Number of valid cells received into interface side A dur-
ing the amount of time shown in Time Elapsed field.
Received
Errored Cells
Number of errored cells received into interface side A
during the amount of time shown in Time Elapsed field.
Received
Mismatched Cells
Number of mismatched cells received into interface side
Received
A during the amount of time shown in Time Elapsed
field.
Valid Cells Sent
Number of valid cells transmitted out of interface side B
during the amount of time shown in Time Elapsed field.
Null Cells Sent
Number of null cells transmitted out of interface side B
during the amount of time shown inTime Elapsed field.
Note: This parameter is not supported in the
OC-12c/STM-4c SM/MM 1+1 APS/MSP modules.
Time Elapsed
Time elapsed since the last reset in h:mm:ss (hour:
minute:seconds) format.
The Utilization page can be displayed for the ATM interface connection
types. You can use the Utilization page to calculate and display the average
number of cells per second, average number of bits per second for a given
ATM interface and for a given time interval.
To view interface utilization information, click the Utilization tab.
The Utilization page appears (see Figure 6-11).
®
System
Description
Release 7.0
255-700-184
Advertisement
Table of Contents
