Table of Contents
Advertisement
Chapter 7 Provisioning Connections Using the Console Interface
Adding a Circuit Emulation-to-Circuit Emulation PVC Connection
Field Descriptions
Connection Capacity
of DSP2x Modes
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
7-42
The display fields on this window provide the following information about all
the circuit emulation-to-circuit emulation VCC PVC connections in the PSAX
system:
Display Field
• Circuit Emula-
This panel displays the information for all circuit emula-
tion Side A
tion A sides of the connections. The connection entries
are displayed in ascending numerical order by slot, then
by port and channel.
• Circuit Emula-
This panel displays the information for all circuit emula-
tion Side B
tion B sides of the connections.
• Flow
This panel displays the direction of the data traffic flow
for the connections.
• Total:
The first number in this field indicates the number of the
0/0
connection table entry on the first line of the currently
displayed window. The second number indicates the
total number of connection table entries for this connec-
tion type.
2 Select the Add a Connection command and press Enter.
The Circuit Emulation-to-Circuit Emulation PVC Connection (see
Figure 7-16) window is displayed.
If the user is configuring DSP parameters on the connection, see the
following table.
Voice Server Module
Algorithm Set Modes
AlgoSet1 (Echo
Cancellation to 128 msec)
AlgoSet2 (DSP2A, G726),
AlgoSet3 (DSP2B, G729a),
AlgoSet4 (fax relay)
AlgoSet5 (Echo
Cancellation to 64 msec)
Description
Connections
Channels per
per DSP
Module (N)
Channel (D)
DSP2A/B/C Voice Server Modules
7
4
DSP2D Voice Server Module
14
Maximum Number of
Connections
(D X N) per Module
32
224
32
128
48
672
Release 7.0
255-700-184
Advertisement
Table of Contents
