Primary Page
Primary Page Buttons The buttons at the bottom of the window have the following functions:
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 8 Provisioning Connections Using the AQueView
If the parameters are valid, the Connections window appears with the
new connection in the Listing page, and the Display Connection
window appears with tabs that contain details about the connection (see
Figure 8-99): Primary, Statistics, and Utilization.
If a parameter is invalid, a Connection Creation Failed message appears,
stating the reason for the failure.
The Primary page displays the information used to create the connection. See
Table 8-34 for field descriptions.
Figure 8-99. Display Connection: VBR-to-ATM SPVC (Primary Page)
Adding Soft Permanent Virtual Connections
®
System
Release 7.0
8-191