Creating A Vbr-To-Atm Vcc Connection - Lucent Technologies PacketStar PSAX Series User Manual

Chapter 7 Provisioning Connections Using the Console Interface
Adding a Circuit Emulation-to-Circuit Emulation PVC Connection
Creating a VBR-to-
ATM VCC Connection
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
7-66
Table 7-17. Field Values for the Frame Relay-to-Frame Relay PVC Connection
Statistics Window
Field Name
On the Interface A Statistics panel, the number of
Frame Tagged
frames tagged due to UPC in the A-to-B direction. Only
applicable to input side.
On the Interface B Statistics panel, the number of
frames tagged due to UPC in the B-to-A direction. Only
applicable to input side.
Time Elapsed Time elapsed since the circuit was established.
Time Since Reset Time elapsed since the last time the Reset Odometers
command was used.
Note: The Reset command on the statistics window
resets only the odometer fields and the corresponding
clock. Other counters increment for the life of the
circuit.
Perform the steps in the following procedure to create a VBR-to-ATM PVC
connection.
Steps to Create a VBR-to-ATM VCC Connection
Begin
Note: The Operations Administration and Maintenance (OAM) feature
is enabled on this screen. Statistical OAM information is provided
on the related statistics screen, while additional OAM
functionality can be enabled from the Diagnostics Menu.
Use the steps in the following procedure to add a VBR-to-ATM VCC PVC
connection, starting at the Connection Configuration Menu window.
1 On the Connection Configuration Menu window, select VBR-to-ATM
VCC Connection and press Enter.
Description
Release 7.0
255-700-184