Table of Contents
Advertisement
Table 7-5. Field Descriptions for the ATM-to-ATM VCC and ATM-to-ATM VPC Connection Statistics
Window
Field Name
cell Drop/Tag
(display only)
Cells Received
(display only)
Cells Transmitted
(display only)
FEC Rate Used
(ATM-to-ATM VCC
only)
Received Odometer
(display only)
Transmitted Odometer
(display only)
Time Elapsed
(display only)
(displayed on Interface
Side A Statistics
panel)
Time Since Reset
(display only)
(displayed on Interface
Side A Statistics
panel)
Adding/Viewing a
Backup ATM-to-ATM
VPC Connection
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 7 Provisioning Connections Using the Console Interface
Number of cells dropped and tagged on incoming side of interface
A or B.
Number of valid cells received since the virtual circuit or virtual
path was established.
Number of valid cells transmitted since the virtual circuit or virtual
path was established.
Displays the forward error correction (FEC) rate being used by the
FEC module in the A2B direction (for ATM Interface A panel), or
B2A direction (for ATM Interface B panel). This field is dymanic
when auto rates are selected. In other cases it will display the rate
set by the user.
Number of valid cells received since this counter was reset.
Note:
This counter serves as an odometer while the Cells
Received field tracks usage for the life of the circuit.
Number of valid cells transmitted since this counter was reset.
Note:
This counter serves as an odometer while the Cells
Transmitted field tracks usage for the life of the circuit.
Time elapsed since last reset.
Time elapsed since the last time the Reset Statistics command was
used.
Note:
The Reset command on the statistics window resets only
the odometer fields and the corresponding clock.Other counters
increment for the life of the circuit.
End
Steps for Adding/Viewing a Backup ATM-to-ATM VPC Connection
Begin
1 From the ATM-to-ATM VPC Connection window, select the Add/View
Backup PVC command and press Enter.
The ATM-to-ATM VPC Backup Connection window is displayed, as
shown in Figure 7-10.
Configuring PVC Connections
Description
Release 7.0
7-25
Advertisement
Table of Contents
