Adding Entries To The Atm Iisp Vbr Routing Table; Creating Iisp Vbr Entries - Lucent Technologies PacketStar PSAX Series User Manual

1-port channelized sts-1e, t1 format module

Hide thumbs Also See for PacketStar PSAX Series:

Table of Contents

Chapter 7 Provisioning Connections Using the Console Interface

Adding a Circuit Emulation-to-Circuit Emulation PVC Connection

Adding Entries to the

ATM IISP VBR

Routing Table

Creating IISP VBR

1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1

5 Select Save Configuration, and press Enter to store the values to the

Multiservice Media Gateway system database.

Use the steps in the following procedure to add an entry to the VBR routing

table, starting at the Connection Configuration Menu window.

Adding NSAP Address Entries

1 On the Connection Configuration Menu window, select the IISP VBR

Routing Table option and press Enter.

The IISP VBR Routing Table window is displayed (see Figure 7-38).

Figure 7-38. IISP VBR Routing Table Window