Viewing Frame Relay Statistics - Lucent Technologies PacketStar PSAX Series User Manual

1-port channelized sts-1e, t1 format module

Hide thumbs Also See for PacketStar PSAX Series:

Table of Contents

Chapter 5 Configuring the Interfaces Using the Console Interface

Configuring the Dynamic Bandwith Circuit Emulation Service Interface

Viewing Frame Relay Statistics

1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1

Table 5-13. Field Descriptions for the Frame Relay LMI DLCI Status Table Window

This column displays the data link connection identifiers

(DLCIs) for all the frame relay interfaces in the PSAX

• Oper Status

This column displays the operational status of all frame

relay interfaces in the PSAX system.

• Status change

This column displays the dates/times for the last time the

operational status of frame relay interfaces was changed.

The first number in this field indicates the number of the

DLCI entry on the first line of the currently displayed

window. The second number indicates the total number

of DLCI entries for this connection type.

You can view two types of frame relay statistics:

Interface statistics—see the procedure "Viewing Interface Statistics"

Link management interface (LMI) statistics—see the procedure "Viewing

Frame Relay LMI Statistics"

Viewing Interface Statistics

On the Frame Relay Interface Configuration window (see Figure 5-13), select

the View FR Interface Statistics command and press Enter.

The Frame Relay LMI Statistics window is displayed (see Figure 5-15).