Table of Contents
Advertisement
Table 8-16. Field Descriptions for the Display Connection: Frame Relay_to_ATM_VCC Backup Page
Field Name
Interface
(display only)
OperStatus
(display only)
AdminStatus
(display only)
VPI
VCI
VI
Automatic
Switchback
Current Active
PVC
Utilization Page
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 8 Provisioning Connections Using the AQueView
Values
AtmUni3-0
AtmUni3-1
IispUser
IispNetwork
CircuitEmulation
DbCirEm
FrameRelayUni
FrameRelayNni
Pri_Isdn_Network
Pri_Isdn_User
HldcPassThrough
AtmPnni1-0
InService
OutOfService
InService
OutOfService
Default: 0 Range:
0–255
Default: 32 Range:
32–4000
Default: 0
Range: 0–255
Yes (default)
No
None
Primary
Backup
The Utilization page measures the amount of traffic running through this
connection.
Creating ATM-to-ATM VPC PVC Connections
Description
The interface type that is configured on the
slot, port, and channel (selected in the Slot,
Port, and Channel fields).
Indicates that the interface is operational.
Indicates that the interface is not operational.
Indicates that no conditions are preventing the
port from being fully operational.
Indicates that some condition is preventing the
port from being configured with an interface.
The virtual path identifier assigned to this
interface.
The virtual channel identifier assigned to this
interface.
Virtual interface, which provides bandwidth
allocation restrictions. Currently available only
on the OC-3c APS and STM-1 MSP modules.
CPU monitors primary connection. If primary
connection becomes available, backup will
switch back connection to primary.
Not currently supported.
Once active, the backup connection will not
switch back to primary connection automati-
cally if primary becomes available.
Indicates that the connection is inactive.
Indicates that the primary connection is active
(carrying user traffic).
Indicates that the backup connection is active
(carrying user traffic).
®
System
Release 7.0
8-91
Advertisement
Table of Contents
