Table of Contents
Advertisement
Copying a Port Configuration
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 4 Configuring Ports and Channels Using the AQueView
Table 4-3. Field Descriptions for the Channelized STS1 Virtual Port Configuration
Window
Field Name
SG Feature
Default:
Disabled,
Enabled
Line Status
NoAlarm, or
one of several
(display only)
alarms
Interface Type
Default:
Unconfigured
(select this field
on the Channel
AtmUni3-0,
Configuration
AtmUni3-1,
page)
AtmUni4-0,
IispUser,
IispNetwork,
CircuitEmula-
tion,
FrameRelayUni,
Gr303,
Hldc-
PassThrough,
Pri-isdn-net-
work,
FrameRelay
Nni,
Pri-isdn-user,
AtmPnni1-0
9 Click Apply.
End
The Copy button on the Port and Channel Configuration window of each I/O
module enables you to copy a port configuration to a range of ports. To copy
a port configuration to a range of ports, perform the steps in the following
procedure from the appropriate Port and Channel Configuration window.
Copying a Port Configuration to Multiple Ports
Begin
1 On the Port Configuration page, click Copy.
Values
The connection gateway feature is dis-
abled.
The connection gateway feature is
enabled.
See the bit map tables for the DS1 mod-
ules under the MIB object lineStatus in
Appendix A.
This value is displayed when the chan-
nel is not configured.
When the channel is configured with
one of the interface types, the interface
type (shown in the preceding column)
is displayed in this field. An asterisk
beside the interface type indicates that
the interface is not in service.
®
System
Using the Right-Click Menu
Description
Release 7.0
4-15
Advertisement
Table of Contents
