Table of Contents
Advertisement
Chapter 6 Configuring the Interfaces Using the AQueView
Configuring the Circuit Emulation Interface Interface
Viewing LMI Frame
Relay Statistics
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
6-50
Table 6-9. Field Descriptions for the Frame Relay Interface Statistics Page
Field Name
Cells Encoded
Number of cells encoded going into interface side A dur-
ing the amount of time shown in Time Elapsed field.
(display only)
Cells Decoded
Number of cells decoded going out of interface side B
during the amount of time shown in Time Elapsed field.
(display only)
Frames Encoded
Number of frames encoded going into interface side A
during the amount of time shown in Time Elapsed field.
(display only)
Frames Decoded
Number of frames decoded going out of interface side B
during the amount of time shown in Time Elapsed field.
(display only)
Frames Mis-
Number of mismatched cells received into interface side
matched
A during the amount of time shown in Time Elapsed
field.
(display only)
Errored Frames
Number of errored frames received during the amount
of time shown in Time Elapsed field.
(display only)
AAL5 Errors
Number of ATM adaptation layer 5 (AAL5) errors going
into interface side A during the amount of time shown
(display only)
in Time Elapsed field.
Time Elapsed
Time in hours, minutes and seconds, since the last time
the Reset Statistics command was entered. The for-
(display only)
mat is HH:MM:SS.
You can view frame relay LMI statistics by clicking the Frame Relay LMI
Statistics tab
The Frame Relay LMI Statistics page is displayed (see Figure 6-22).
®
System
Description
Release 7.0
255-700-184
Advertisement
Table of Contents
