Table of Contents
Advertisement
Chapter 7 Provisioning Connections Using the Console Interface
Adding a Circuit Emulation-to-Circuit Emulation PVC Connection
Table 7-19. Field Descriptions for the VBR-to-ATM VCC PVC/SPVC Connection Statistics Window
Field Name
RDI Rx/Tx
(display only)
cell Drop/Tag
(display only)
Cells Received
(display only)
Cells Transmited
(display only)
In Odometer
(display only)
Out Odometer
(display only)
Adding/Viewing a
Backup PVC
Connection
Commands
Field Descriptions
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
7-74
Number of remote defect indicator signal (AIS) cells received/trans-
mitted.
Number of cells dropped/tagged.
Total number of cells received.
Total number of cells transmitted.
Total number of cells encoded going into interface side B since the
connection statistics were reset.
Total number of cells decoded going out of interface side A since the
connection statistics were reset.
Steps to Add/View a Backup VBR-to-ATM VCC PVC Connection
Begin
1 From the VBR-to-ATM VCC PVC Connection window, select the
Add/View Backup PVC command.
The VBR to-ATM VCC PVC Backup Connection window is displayed.
The commands on this window have the following functions:
Command
• Add This Connection
• Delete Connection
• Go Back to Primary
PVC Connection –>
2 The fields on this window are described in the following table.
Description
Function
Adds connection entered on Backup ATM
interface right panel.
Deletes backup connection.
Returns to VBR-to-ATM VCC PVC Con-
nection window.
Release 7.0
255-700-184
Advertisement
Table of Contents
