Table of Contents
Advertisement
Viewing Connection Statistics
Commands
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 7 Provisioning Connections Using the Console Interface
Adding a Circuit Emulation-to-Circuit Emulation PVC Connection
5 To review this connection, select the Go Back to Connection Table
command and press Enter (or press Ctrl+B).
The Circuit Emulation-to-Circuit Emulation PVC Table window is
displayed with the values you just applied.
6 To add more connections of this type, repeat steps 2 through 5 for more
connections as needed.
7 To permanently save these connections, press Ctrl+G to return to the
Console Interface Main Menu window.
8 Select the Save Configuration command, and press Enter to store the
values in the PSAX system database.
End
To view statistics for this connection, use the following procedure.
From the Circuit Emulation-to-Circuit Emulation PVC Connection window,
select the View Connection Statistics command and press Enter.
The Circuit Emulation-to-Circuit Emulation Statistics window is displayed
(see Figure 7-17).
Figure 7-17. Circuit Emulation-to-Circuit Emulation Statistics Window
The commands in this window have the following functions:
Release 7.0
7-45
Advertisement
Table of Contents
